Windows: Install Sanas app (Noise Cancellation)

• Updated on Apr 27, 2026
• Published on Apr 21, 2025
• 5 minute(s) read

Introduction

This guide provides instructions for installing the Sanas app with Noise Cancellation ( NC) on a Windows computer. Sanas app is available on multiple platforms. Need help installing the Sanas app on another platform? Find all the platform-specific installation guides here.

Installation methods for Windows

Sanas supports the following methods for installing the Sanas app on Windows:

• App installer: Installer-based app installation.
• Windows CLI: Command-based app installation.

Before we start:

• Ensure you have access to the Sanas Portal (opens in new tab) to download the application.
• You will need the necessary permissions to deploy the app to connected computers.
• Ensure your Windows computer already has the Visual C++ Redistributable. If it’s not present, you can download the suitable package from Microsoft (opens in new tab).

Method 1: Running app Installer

Note: You need not to update the Installer ID while Installing the Sanas app version 4.1.X and above during installation. If required, you can update the installer ID later to use the Auto-activation for Sanas app.

1. Download the Sanas app.

   1. Log in to the Sanas Portal (opens in new tab) with your credentials, and navigate to the Download App (opens in new tab) page.
   2. Download the Windows app in your desired format ( .exe or . msi). App downloading starts automatically.

2. Run the app installer.

   1. Locate the app installer on your computer that you downloaded in the previous step.
   2. Double-click on the installer and run it. You’ll see the setup wizard window.
   3. Click Next to proceed .
   4. Acknowledge the license agreement, then click Next.
   5. Click Next to proceed with the default installation location, or click Change to modify the installation directory if necessary.
   6. Wait until the installation process completes. Once the installation is complete, the Sanas app launches automatically.

📔 Note: By default, you’ll find the User Activation Key enabled for app activation. If required, update the Installer ID to enable auto-activation.

Method 2: Deploying through Windows CLI

1. Download the Sanas app.

   1. Log in to the Sanas Portal (opens in new tab) with your credentials, and navigate to the Download App page.
   2. Download the Windows app in your desired format ( .exe or . msi). App downloading starts automatically.
   3. Copy the Installer ID and save it securely.

2. Launch the Windows CLI as administrator.

3. Run the command below based on your preference:

Command for .msi installer

msiexec /i <path_to_.msi_installer> /q installerid="Installer Id"

Command for .exe installer

<path_to_.exe_installer> /q /installerid="Installer Id"

4. Wait until the installation process completes. Once completed, the Sanas app will be automatically launched.

(Optional) Update Installer ID

Follow the instructions below to update the Installer ID on the already installed Sanas app. Updating the Installer ID parameter is essential to use the auto-activation mode.

What is an Installer ID, and why is it needed?

An Installer ID is a unique workspace identifier that helps Sanas to identify the Workspace and pre-configure the Sanas application before the user starts using it. Updating the Installer ID becomes essential when you wish to set up the credential-less app activation mode called Auto activation for users.

To get your Installer ID:

1. Navigate to the Download app (opens in new tab) page on the Sanas Portal, and ensure you’ve selected your desired Workspace.
2. Copy the Installer ID and save it securely.

Updating the Installer ID for the already installed Sanas app

1. Launch the Windows CLI as administrator on your computer.
2. Run the command below to update the Installer ID:

reg add "HKLM\SOFTWARE\Sanas.ai\Sanas" /v InstallerId /t REG_SZ /d "<Installer Id>" /f

3. Verify the update by navigating to the installation registry (HKEY_LOCAL_MACHINE/SOFTWARE/Sanas.ai/Sanas), and ensure the value of the Installer ID parameter is present.

4. Close the current Sanas app session if already running, and re-launch it. The app should activate now with Auto-activation.

Support

Need help? Get in touch with our Support Team for assistance.