Quickstart Guide: Sanas Chrome Extension

Updated on Jun 12, 2026
Published on Apr 30, 2026
Reading time 3 minute(s)

Introduction

This guide walks administrators through the end-to-end setup required to deploy the Sanas Chrome Extension for their organization. By the end of this guide, the extension will be installed on a user's machine, remote inference will be configured, and ready to test their first Sanas-enabled call.

Tip: For in-app guidance, search for "Configure Remote Inferencing" in the Sanas Help widget from the Sanas Portal.

Before You Begin

Ensure the following are in place before starting:

You must have access to the Sanas Portal and have the following permissions, Group Settings or Account Settings: Full Access.
You must have decided upon the preferred remote inferencing option — Sanas Cloud or Self-Hosted. If your organization is pursuing self-hosted inference, contact Sanas Support to complete the additional technical setup before proceeding further.
You’ve understood the Chrome extension’s requirements. Refer to this decision table for help.

.png?sv=2026-02-06&spr=https&st=2026-07-18T06%3A53%3A26Z&se=2026-07-18T07%3A06%3A26Z&sr=c&sp=r&sig=ahqnrPURC1e7rqRNTpmSEJhhHhaoY5VX0iiIMGp6BnI%3D) Install the Sanas Chrome Extension

Install the extension on the user's machine from the Chrome Web Store.

On the user's machine, open Google Chrome.
Navigate to the Sanas Chrome Extension page on the Chrome Web Store.
Click Add to Chrome.
On the confirmation dialog, click Add Extension.

The Sanas icon appears in the Chrome toolbar once the installation is complete.

Note: If your organization manages Chrome browser settings centrally (for example, via Google Admin Console or a device management policy), you can push the extension to user machines without requiring manual installation. Contact Sanas Support for guidance on managed deployment.

.png?sv=2026-02-06&spr=https&st=2026-07-18T06%3A53%3A26Z&se=2026-07-18T07%3A06%3A26Z&sr=c&sp=r&sig=ahqnrPURC1e7rqRNTpmSEJhhHhaoY5VX0iiIMGp6BnI%3D) Verify Authentication Mode

The Sanas Chrome Extension currently supports the following login options below. Verify that the group you are configuring uses either methods before proceeding.

User Activation Key (UAK)
- Log in to the Sanas Portal using your credentials.
- Navigate to Settings > Configuration, then select Application Authentication under Platform Authentication.
- Ensure UAK is selected. If not, update it before continuing.

.png?sv=2026-02-06&spr=https&st=2026-07-18T06%3A53%3A26Z&se=2026-07-18T07%3A06%3A26Z&sr=c&sp=r&sig=ahqnrPURC1e7rqRNTpmSEJhhHhaoY5VX0iiIMGp6BnI%3D) 2. Single Sign-On (SSO)

Log in to the Sanas Portal using your credentials.
Navigate to Settings > Configuration, then select Application Authentication under Platform Authentication.
Ensure SSO is selected, then Domain based under redirection type. If not, update it before continuing.

.png?sv=2026-02-06&spr=https&st=2026-07-18T06%3A53%3A26Z&se=2026-07-18T07%3A06%3A26Z&sr=c&sp=r&sig=ahqnrPURC1e7rqRNTpmSEJhhHhaoY5VX0iiIMGp6BnI%3D)

Note: Verify with your Sanas point of contact (POC) or contact Sanas Support to confirm that this feature has been enabled for your organization. Otherwise, it will not be accessible from your account.

.png?sv=2026-02-06&spr=https&st=2026-07-18T06%3A53%3A26Z&se=2026-07-18T07%3A06%3A26Z&sr=c&sp=r&sig=ahqnrPURC1e7rqRNTpmSEJhhHhaoY5VX0iiIMGp6BnI%3D) Configure Remote Inference on the Sanas Portal

Remote inference must be configured on the Group before users can authenticate with the extension.

On the Portal’s Group Tree, select the Group you want to configure remote inferencing for.

Note: For account-wide configuration, select your Sanas Account instead of an individual Group. 2. Navigate to Settings > Configuration, then select Remote Inferencing under Group / Account Settings. 3. Enter the Endpoint URL provided by Sanas in the respective field, then click Save. Users will be routed to this access point while using Sanas.

Note: Contact Sanas Support to obtain your Endpoint URL. Ensure that all users can reach the configured Endpoint URL from their network via HTTPS on Port 443.

.png?sv=2026-02-06&spr=https&st=2026-07-18T06%3A53%3A26Z&se=2026-07-18T07%3A06%3A26Z&sr=c&sp=r&sig=ahqnrPURC1e7rqRNTpmSEJhhHhaoY5VX0iiIMGp6BnI%3D) 4. Once the endpoint is saved, configure the inferencing settings: 1. On the Configuration tab, select Accent Translation under Products. 2. Select Remote Inference under Inference Mode. 3. (Optional) Select your preferred Speech AI model from the drop-down menu. Sanas automatically selects the recommended model. 4. (Optional) Enable the Lock Configuration toggle to enforce this inferencing configuration across subgroups and prevent subgroup administrators from modifying it.

.png?sv=2026-02-06&spr=https&st=2026-07-18T06%3A53%3A26Z&se=2026-07-18T07%3A06%3A26Z&sr=c&sp=r&sig=ahqnrPURC1e7rqRNTpmSEJhhHhaoY5VX0iiIMGp6BnI%3D) 5. Click Save to apply the changes.

.png?sv=2026-02-06&spr=https&st=2026-07-18T06%3A53%3A26Z&se=2026-07-18T07%3A06%3A26Z&sr=c&sp=r&sig=ahqnrPURC1e7rqRNTpmSEJhhHhaoY5VX0iiIMGp6BnI%3D) Add Users to the Portal

Add users to the Portal and assign them to the Group configured in Step 3. Refer to Add User for detailed instructions.

If your organization uses the User Activation Key (UAK) authentication mode, share the following credentials with each user:

Account ID — located at the top of the Group Tree. This is common across all users in your account.
User ID — unique to each user.

.png?sv=2026-02-06&spr=https&st=2026-07-18T06%3A53%3A26Z&se=2026-07-18T07%3A06%3A26Z&sr=c&sp=r&sig=ahqnrPURC1e7rqRNTpmSEJhhHhaoY5VX0iiIMGp6BnI%3D) Test Your Setup

Add a temporary user to the configured Group and install the Sanas Chrome Extension on your Chrome browser to verify the installation and portal configuration setup.

Please refer to the next steps below on how to test the Chrome Extension.

Next Steps

Share the Sanas Chrome Extension User Guide with your users to help them get started with Sanas.

Support

Need help? Get in touch with our Support Team for assistance.